diy evans waterless coolant prep fluid my350z

Diy evans waterless coolant prep fluid my350z free#

To ensure success using Prep Fluid to prepare your cooling system for Evans waterless coolants and to determine the amount of Prep Fluid needed, follow the recommended installation procedure. Protects cooling system metals during flush.Allow to cool and drain out Prep Fluid in same manner as old water-based coolant. Fill with Evans Prep Fluid (waterless flush) and run for 15 minutes to circulate. Use high volume air to force out remaining coolant. Ensures that Evans coolants will meet the water content limits and provide peak performance Basic Installation Procedure: Drain all old water-based coolant out from radiator, block, and heater core if accessible.Ensures all residual water is removed from the system.That limits the toxicity which comes with exposure to the product. Traditional antifreeze or coolant products use ethylene glycol instead. The waterless coolant manufactured by Evans is based on propylene glycol. UsageĮvans Prep Fluid is ready to use-no water required. There is a safety component to waterless coolant not found in other options.

It is not a substitute for thoroughly draining the cooling system and related. It should be used when block drains are unavailable or cannot be removed. Check coolant level daily until coolant level stabilizes add Evans NPG+ coolant if necessary. Check coolant level and top off if necessary. Run engine until it is warm and thermostat opens.

DO NOT ADD ANY WATER DO NOT TOP OFF WITH WATER 7.

Diy evans waterless coolant prep fluid my350z free#

Engine Typesįor use with all engines being converted to any Evans waterless coolant, after draining 50-50 coolant from the cooling system. Find Evans Waterless Coolant Prep Fluid and get Free Shipping on Orders Over 109 at Summit Racing Evans Waterless Coolant Prep Fluid is a waterless flush designed to seek out the remaining water after draining the cooling system of an engine. Plug all drains, reconnect heater hose and fill system with Evans NPG+ coolant. Evans Coolant Installation Kit, P/N E2197, contains test strips to measure the water content, along with other useful items to guarantee a perfect installation. Measure the water content as the final step. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only. Allow engine to cool, drain out the Prep Fluid cooling system before adding Evans Waterless Coolant. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid should be used when block drains are unavailable or cannot be removed. Evans prep fluid is designed to assist with the conversion to Evans waterless coolant. Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant.